English
简体中文
Français
日本語
한국어
Português
Русский
Español
Website navigation
Position:
E-mail:
Tell:
Whatapp:+(86) 180-3717-8440
Address:No.18 Hongye Road,Hi-tech zone,Zhengzhou,China,450000
Tel Number
181-3719-5600
Specific Introduction:
KJ-1200X-III-80 is a three-zone slide-able tube furnace with 3" ID x79" L quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For the fastest heating, the furnace may be pre-heated to the desired temperature and then be slid to the sample's position. As for the fastest cooling, the furnace can be slid to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.
Parameters:
KJ-1200X-III-80 is a three-zone slide-able tube furnace with 3" ID x79" L quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For the fastest heating, the furnace may be pre-heated to the desired temperature and then be slid to the sample's position. As for the fastest cooling, the furnace can be slid to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.
Parameters:
| Furnace Structure |
|
| Power | 7.0KW |
| Voltage | AC 208-240V Single Phase, 50/60 Hz |
| Max. Temperature | 1200°C (<1 hour) |
| Continuous Temperature | 1100°C |
| Heating Zone Length |
|
| Constant Temperature Zone | 300 mm (+/-1°C @ 400-1200°C) |
| Heating Elements | Fe-Cr-Al Alloy doped by Mo |
| Processing Tube Size |
High purity fused quartz tube Size: OD: 80 x ID 75 x Length 2000 ( mm) Two foam ceramic blocks are included which must be placed inside the tube to avoid heat radiation damaging O-ring |
| Temperature Controller |
|
| Temperature Accuracy | +/ - 1°C |
| Vacuum Level |
|
|
Sliding Rails / Table |
Double sliding rail made by Cr plated steel Sliding length: 1200 mm One slide stopping clamp is included for holding the position of the furnace. |
| Dimensions | 2500 L, × 510 H ×750W, mm |
| Net Weight | ~ 250 Kg |
| Shipping Dimension | 90" x 40" x 45" (inch) |
| Shipping Weight | 600 lbs |
| Warranty | One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order replacements at related products page). |
